Zelmer 13Z014 Manuel d'utilisateur télécharger pdf (Page 69)

OPERATION OF THE CONTROL PANEL

On/off button (M)

Turn the espresso machine on by pressing button (M). The pilot light (L)

will illuminate in red, and the standby light (N) will start ashing.

Warning: Before turning the espresso machine on, check that the regulator

knob (K) is in position 0 (off).

When the espresso machine is ready to operate, the standby pilot light (N)

will come off.

Warning: Remember that if the standby pilot light (N) ashes, it indicates

that the espresso machine has not reached the right temperature for

operation.

To turn the espresso machine off, simply press button (M).

ESPRESSO COFFEE

When the espresso machine is turned on – button is pushed in (M) (the

on/off light is illuminated (L)), and the hot water/steam button (B) is

in the” pushed out” position (the standby light (N) is not illuminated) –

the appliance is in the espresso mode.

If the steam function has been used before, set the hot water/steam button

(B) in the “pushed out” position . The moment the espresso

machine has reached the right temperature, the standby light (N) will stop

ashing and will come off. The espresso machine is ready for brewing.

Notice: Place a cup/cups under the brew head.

To brew espresso (turning on the pump), turn the regulator knob (K)

anticlockwise into position . The standby light (N) is illuminated during

this process.

To turn off the pump (to stop the coffee brewing/pouring process), re-set

the knob into position 0.

HOT/BOILING WATER

When the espresso machine is on – button is pushed in (M) (the on/off

light is illuminated (L)), and the hot water/steam button (B) is in the

“pushed out” position (the standby pilot light (N) is not illuminated) –

the appliance is in the hot water mode.

If the steam function has been used before, set the hot water/steam

button (B) in the “pushed out” position . The moment the espresso

machine has reached the right temperature, the standby light (N) will stop

ashing and will come off. The espresso machine is ready to operate.

Notice: Place a suitable dish under the steam wand (C).

To obtain hot water/steam, turn the regulator knob (K) clockwise into position .

The standby light (N) is illuminated during this process. To turn off the

pouring of hot/boiling water, re-set the knob into position 0.

STEAM

When the espresso machine is on – button is pushed in (M) (the on/off

pilot light is illuminated (L)), and the hot water/steam button (B) is in

the “pushed in” position (the standby light (N) is not illuminated) – the

appliance is in the steam mode.

If the espresso or hot water function has been used before, set the

hot water/steam button (B) in the “pushed in” position” . The

moment the espresso machine has reached the right temperature, the

standby light (N) will stop ashing and will come off. The espresso machine

is ready for the steam function.

To start steam dosing, turn the regulator knob (K) clockwise into position

. The standby light (N) is illuminated during this process. To turn of

steam dosing, re-set the knob into position 0.

A SHORT GUIDE TO USING THE ESPRESSO MACHINE

The pictures below are intended to help you use the espresso machine. Each picture has its number. The content of the guide will make references to

these pictures, therefore they have been numbered to ensure they are easy and comfortable to use.

For example: Fill up the water tank (1) with cold water – do not use mineral water.

Each time you see such numbers, please refer to the relevant pictures.

Preparing the espresso machine – making espresso

Fill up the water tank up to the MAX

indicator.

Ensure that the regulaot knob (K) is in position

0. Plug the power cord into a 230 V alternating

current mains socket.

Press button (M) to turn on the espresso

machine. The on/off pilot light will illuminate

(L). The standby pilot light will start ashing

(N).

Select a lter suitable for 1 cup or 2 cups

(depending on your preferences) and place the

metal lter (H) in the lter holder (E).

TIP: Fill up the metal lter with ground coffee

using the measure (G). Tamp the coffee lightly

with the temper, i.e. the at part of the measuring

spoon (G). Do not tamp the coffee too rmly.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 75 76

Commentaires sur ces manuels

Pas de commentaire

Zelmer 13Z014 Manuel d'utilisateur Page 69

Commentaires sur ces manuels

Produits connexes et manuels pour Machines à café Zelmer 13Z014