Zelmer 1500 Manuel d'utilisateur télécharger pdf (Page 35)

VACUUM CLEANING

Before you start up your vacuum cleaner:

check if the bag is assembled inside the dust cup (1), air-inlet lter (2) and air

–outlet lter (3),

–

ATTENTION!!! Be careful during pulling the

cord out, the yellow mark on the cord shows

the end of the cord.

start the vacuum cleaner up pressing the(6)

– button and set appropriate suction

power.

SUCTION POWER REGULATION

The vacuum cleaner is equipped with electronic power regulation, which enables

uent power regulation. Moving the cursor according to the symbols on the vacuum

cleaner results in increasing (+) or reducing (-) power.

The vacuum cleaner is also equipped with

mechanical suction power regulation on the

hose handle. It is enough to open the valve,

as it is shown in the drawing, to reduce the

suction power.

FULL DUSTBAG INDICATOR FUNCTION

When full dust bag indicator is covered (red colour), while the

nozzle or brush is elevated over the cleaning surface, it indi-

cates the necessity to remove or replace the bag. The full dust

bag indicator can operate in case of locking bar the hose or t-

ted accessories. In such case:

Remove the hose end from the top lid and clean the hose

as well as the tted accessories.

„PARKSYSTEM” FUNCTION – AUTO START

The vacuum cleaner is equipped with �Parksystem”

– “AUTO START” function: the function enables temporary

switching off the vacuum cleaner using the brush-nozzle

hook, without using on/off button. In order to do it, insert

the brush-nozzle hook into the casing socket (7) during

operation. The vacuum cleaner shall switch off automati-

cally.

SAFETY VALVE OPERATION

The vacuum cleaner is equipped with safety valve, (which is located inside the dust

compartment -bag). It opens automatically when the hose or tted accessories are

blocked or the dust bag is excessively full of dust. You can hear characterstic �utter-

ing” sound after valve opening.

–

ON/OFF

button

Suction power

adjustment knob

Cord rewind

button

SAFBAG dust bag

Gap nozzle Small nozzle Small brush BNB brush

Type 1500

ORION

Type 2500

COBRA II Silent / ORION MAX

Full bag indicator

insert one end of the exible hose (4) into the air

intake duct, t another end of the hose (handle)

with sucking tube,

t the length of the telescope tube for desired

working position (depending on your size) press-

ing �A” button move the tubes in direction indi-

cated by the arrows,

t the chosen accessories, i.e. brush-nozzle, in

another end of the tube,

pull the supplying cord(5) out of the casing and

insert the plug into power socket,

–

Turbo brush

Electro brush

socket

1 2 ... 30 31 32 33 34 35 36 37 38

Commentaires sur ces manuels

Pas de commentaire

Zelmer 1500 Manuel d'utilisateur Page 35

Commentaires sur ces manuels

Produits connexes et manuels pour Aspirateurs Zelmer 1500